Quantum Guardian QG100 Owner's Manual download pdf (Page 15)

12.0 MAINTENANCE CLEANING

YOUR ALARM:

12.1. Keep your CO alarm clean using a damp

cloth or vacumn.

12.2. To clean your alarm remove it from the

mounting bracket as outlined in section 10.2

IF TAMPER RESISTANT PIN HAS BEEN

USED, REFER TO STEP 10.7 UNDER

INSTALLATION INSTRUCTIONS FOR

REMOVAL INSTRUCTIONS. (See Figure 6)

12.3 You can clean the interior of your alarm

by using your vacuum cleaner hose and vacu-

uming through the openings around the

perimeter of the alarm.

12.4 The outside can be wiped with a cloth.

12.5 After cleaning, reinstall your alarm, as

outlined in Section 10.6, and test your alarm

by using the TEST button.

12.6 Test your detectors weekly and repair or

replace them when they no longer function.

As with any electronic product, alarms have a

limited life and alarms that do not work can-

not protect you. (See section 14.0)

WARNING: Do not use any household clean-

ing agents, paints, varnishes or any other

chemical on your QG100 alarm.

NOTE: REGULAR TESTING IS RECOM-

MENDED.

13.0 BATTERY REPLACEMENT: IF

TAMPER RESISTANT PIN HAS BEEN

USED, REFER TO SECTION 10.7 UNDER

INSTALLATION INSTRUCTIONS FOR

REMOVAL INSTRUCTIONS.

13.1 To replace the battery remove the alarm

from the mounting plate by rotating the alarm

in the direction of the "OFF" arrow on the

cover (See Section 10.2). Remove and rein-

stall the battery in the correct orientation as

noted on the inside of the battery door. After

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments